With multiple ice melting options, how do you decide what's best for you? Do you apply it before the storm? Or after? How much do you apply during the storm? If you or your customer is a new user, read below on the different application methods and guides on how to properly lay down the salt when the storm hits.
Don't Overapply Lay the salt down in layers and be gentle with your application. A little goes a long way! Lay down a thin layer before a storm, and then another thin layer during the storm (if possible). This will allow the salt to work at its fullest capacity and will prevent over-application. Once the storm is done, clean up and apply another thin layer to prevent freezing of snow and ice.
Be Cautious of the Temperature If the temperature is (-10C) or warmer Rock Salt or a mild blend will do the trick as salt lowers the freezing point to this temperature. However, if the temperature is lower, a calcium, potassium or magnesium blend is suggested as it works faster and carries a longer residual effect. This also eliminates over-application as you won't need as much salt if you're using the appropriate blend. Try our Premium Treated Salt for temperatures to (-21C).
Clean Up the Salt If there's salt left over on the ground, don't leave it for the next storm. Shovel all the pieces into a container and reapply it when the next storm comes.
Concrete The standard industry recommendation is to give one year for concrete to cure before applying any form of de-icers. The industry typically suggests using sand for the first year. In cases like these, the ultimate goal is to prevent slips and falls effectively. When it comes down to using ice melters, it is suggested to use higher end products enhanced with extenders to avoid the freeze-thaw cycle. Usually scaling back the application to the lowest rate is recommended, at the discretion of the customer. For interlocking bricks and concrete, our ProMelt Essential Ice Melter is perfect.
All our ice melters are environmentally friendly and have anti-corrosion inhibitors. The suggested application rate is: 1-4.5lbs per 540 sq.ft. Products start working quickly and have extenders built into the formulation to provide that lasting power. All of our ice melters can be applied before, during or after a winter weather event.
Bagged Salt, Bagged Ice Melters and Ice Scrapers are now in stock. Save Salt this winter when temperatures are below -10 degrees and use a Treated Salt that will work at lower temperatures! Sold in a 50 pound pail only.
